Kwik-Way Online Store


All Products





1 Gallon (3.8L) Grinding Coolant Concentrate

Buy Now 
1 Gallon (3.8L) Grinding Coolant Concentrate
Model: 000-2115-04
Price: $41.45

Weight: 8.76lbs

Grinding Coolant Concentrate One gallon (3.8L), excellent for surface grinding of flywheels, cylinder heads, engine blocks and all other surface ... more info

1 Gallon (3.8L) Valve Grinding Oil

Buy Now 
1 Gallon (3.8L) Valve Grinding Oil
Model: 000-2112-73
Price: $42.56  $38.30
Save: 10% off


Weight: 8.2lbs

1 Gallon (3.8l) Valve Grinding Oil. Proper lubrication is necessary for quality valve finishes, abrasive performance and machine life. This is a ... more info

1-7/8 inch Centering Cone Bolt Assembly

Buy Now 
1-7/8 inch Centering Cone Bolt Assembly
Model: 794-8010-64
Price: $39.92

Weight: 0.22lbs

1-7/8 inch Centering Cone Bolt Assembly

10AMP 115V Coil Relay

Buy Now 
10AMP 115V Coil Relay
Model: 794-8625-15
Price: $68.45

Weight: 0.5lbs

Relay Switch (contactor) used on printed circuit board for the Power Column up and down on FG5000 and FG10000 Flywheel Grinders. 3 of these are ... more info

12MM x 0.75 x 2.5 Hex Nut

Buy Now 
12MM x 0.75 x 2.5 Hex Nut
Model: 000-1100-32
Price: $3.20

Weight: 0.1lbs

A single Nut. 12MM x 0.75 x 2.5 Hex.

2 Matched V-BELTS (3/8 X 17)

Buy Now 
2 Matched V-BELTS (3/8 X 17)
Model: 001-1902-54
Price: $58.05

Weight: 0.4lbs

2 Matched V-BELTS (3/8 X 17) for Model FWS-II (except serial numbers 7000 - 7315)  Replaces 001-1902-53 which is no longer available.

2-5/8 inch Centering Cone Bolt Assembly

Buy Now 
2-5/8 inch Centering Cone Bolt Assembly
Model: 794-8010-65
Price: $41.49

Weight: 0.28lbs

2-5/8 inch Centering Cone Bolt Assembly for Van Norman Flywheel Grinders

3 Inch Fine (Rocker Arm) Grinding Wheel

Buy Now 
3 Inch Fine (Rocker Arm) Grinding Wheel
Model: 010-0300-13
Price: $30.30

Weight: 0.9lbs

For Models SVS, VS, EVS, SM, SK, KK, CV, SV, and VC Valve Refacers.

3 inch General Purpose Stem Grinding Wheel for valve refacers

Buy Now 
3 inch General Purpose Stem Grinding Wheel for valve refacers
Model: 010-0300-72
Price: $25.00

Weight: 0.54lbs

New Reduced Price KWIK-WAY Valve Stem "butt" Grinding Wheel. 3 inch General Purpose for SVSII series valve refacers. High quality abrasive ... more info

3 mm Small Collet

Buy Now 
3 mm Small Collet
Model: 012-1575-72
Price: $39.85

Weight: 0.1lbs

9/64"  0.1094 - 0.1406 inches range 2.77 - 3.57 mm range (NOTE: Small Collet Chuck Extension Rod is required to be able to use ... more info


Your IP Address is: 54.80.227.189
Copyright © 2017 Kwik-Way Store. Powered by Zen Cart

All Information Displayed on this Website is intended for US Domestic customers only.
International Customers Should Contact Their Local Distributor or Write to Us at international@kwik-way.com for a quote.

Parse Time: 0.378 - Number of Queries: 311 - Query Time: 0.15604429077148