Kwik-Way Online Store


Chuck Shaft Assembly (21mm)

$3,450.90




  • Model: 012-1025-21
  • Shipping Weight: 4.5lbs
Add to Cart:


If you are replacing your existing STANDARD sized chuck on your Valve Refacer, then
our Large Chuck requires a replacement large yoke (Part Number 012-1035-21) and the chuck cover will have to have minor grinding where the chuck cover fits over the chuck...it has to be cut back for the large chuck to fit properly. 

If you have questions or concerns about this, you can all our Technical Support Office at 1-800-553-5953.

 
NOTE: Chuck orders, in general, can take 3 to 4 weeks for delivery. Chucks are made in small batches and have a high fail rate in the final stages of production because of the very high tolerances required.  For this reason and the fact that chucks for new machine sales take precedence it can sometimes take longer for chucks to become available for parts orders.

This product was added to our catalog on Tuesday 30 November, 1999.

Your IP Address is: 54.159.64.172
Copyright © 2017 Kwik-Way Store. Powered by Zen Cart

All Information Displayed on this Website is intended for US Domestic customers only.
International Customers Should Contact Their Local Distributor or Write to Us at international@kwik-way.com for a quote.

Parse Time: 0.264 - Number of Queries: 145 - Query Time: 0.082731501251221