Kwik-Way Online Store


Single Pass Solid Carbide, rough cut, single pass boring.

$91.15




  • Model: 062-1071-50
  • Shipping Weight: 0.04lbs
Add to Cart:


Single Pass Solid Carbide, rough cut, single pass boring.

FORMULA I BORING BAR TOOLS
Super Lapping Disc 000-2110-10 Required

Lapping the Single Pass Tool

1. Plase the tool holder in the large lapping fixture. Set the swivel feature to position 1. Lap carbide until face is smooth.

Note: Use only Kwik-Way lapping oil, part number 000-2109-00, 1/2 pint or 000-2109-19, 1 pt.

2. Rotate the swivel feature to position 3R. Lap that face until it is in good condition.

3. Shift the swivel feature to position 2. Lap that face until desired width is obtained.

4. Insert tool holder in small lapping fixture marked 4R. Lap that face until all material buildup has been removed.

This product was added to our catalog on Tuesday 30 November, 1999.

Your IP Address is: 54.158.21.176
Copyright © 2017 Kwik-Way Store. Powered by Zen Cart

All Information Displayed on this Website is intended for US Domestic customers only.
International Customers Should Contact Their Local Distributor or Write to Us at international@kwik-way.com for a quote.

Parse Time: 0.288 - Number of Queries: 144 - Query Time: 0.089959090179443