| |
Kwik-Way
FWSII
Boring Bar
Model FWSII Boring
Bar is especially suited for boring chain
saw, go-cart, lawn mower, marine and motorcycle
cylinders.
-
Bore
capacity of 1-3/4" to 3-3/4" (44-95mm)
-
Three
finger centering
-
Two feed
and speed combinations
-
Exclusive
3 year limited warranty
[Download Literature]
|
|
Kwik-Way FWS Boring Bar
(shown on the 1291 Boring Fixture - sold
separately)
|
|
Specifications: |
|
|
|
|
|
Bore Capacity |
1-3/4"-3-3/4"
(44mm-95mm) |
|
Standard
Accessories: |
|
|
Stroke |
12"
(305mm) |
|
3/32" Hex Key |
000-0600-46 |
| |
Speeds |
2 |
|
1/8" Hex Key |
000-0600-54 |
| |
Motor |
1/2 hp |
|
5/32" Hex Key |
000-0600-62 |
|
Overall Height |
35"
(889mm) |
|
3/16" Hex Key |
000-0600-70 |
| |
Overall Depth |
15-1/2"
(393mm) |
|
5/16" Hex Key |
000-0600-20 |
|
Overall Width |
11"
(279mm) |
|
#704 Armstrong Wrench |
000-8800-27 |
|
Shipping Weight |
180 lbs
(81.8kg) |
|
Lapping Fixture Assembly |
059-0550-03 |
|
|
|
|
Lapping fixture Assembly, Roughing |
059-0555-18 |
|
Ordering
Information: |
|
|
1/4" Diameter Round Bristle
Brush |
000-8900-14 |
| |
FWSII Standard Bar-115V/60Hz/1Ph |
059-0010-00 |
|
Green Touch-Up Paint |
000-9602-31 |
| |
FWSII Standard Bar-230V/60Hz/1Ph |
059-0010-27 |
|
Diamond Lapping Oil, 1 oz |
002-0023-45 |
| |
FWSII Standard Bar, Metric-115V/60Hz/1Ph |
059-0010-19 |
|
Carrying Case Assembly |
059-0500-01 |
| |
FWSII Standard Bar, Metric-230V/60Hz/1Ph |
059-0010-03 |
|
Stop Rod Assembly |
057-0175-03 |
| |
FWSII Standard Bar-230V/50Hz/1Ph |
059-0010-60 |
|
Tool Bit Assembly, 1-17/32"
Long |
059-1062-52 |
| |
FWSII Standard Bar, Metric-230V/50Hz/1Ph |
059-0010-78 |
|
Tool Bit Assembly, 1-15/16"
Long |
059-1073-05 |
| |
|
|
|
Tool Bit Assembly, 2-1/4" Long |
059-1073-56 |
| |
Optional
Accessories: |
|
|
Centering Finger #1 (set of 3) .859" Long |
066-0361-54 |
| |
1291 Small Engine Boring Fixture |
057-1291-07 |
|
Centering Finger #2 (set of 3) 1.031" Long |
066-0362-51 |
| |
Optional Small V-Block Mounting Kit |
054-0300-00 |
|
Centering Finger #3 (set of 3) 1.203" Long |
066-0363-59 |
| |
|
|
|
Centering Finger #4 (set of 3) 1.375" Long |
066-0364-56 |
| |
Formula I
Carbide Boring Tools: |
|
|
Centering Finger #5 (set of 3) 1.547" Long |
066-0365-53 |
| |
Single Pass-Rough Cut |
062-1071-50 |
|
Centering Finger #6 (set of 3) 1.720" Long |
063-0365-52 |
| |
Counter bore - cut off sleeves, counter bore
blocks |
062-1074-50 |
|
Micrometer Assembly |
|
| |
45 Degree Offset - for blind holes in manual
center bars |
062-1251-50 |
|
|
|
|
|
|
|
|
|
